Lantronix SM24TBT2DPA Скачать руководство пользователя страница 123

Страница: 123 / 360

Lantronix

SM24TBT2DPA and SM24TBT2DPB Web User Guide

33738 Rev. H

https://www.lantronix.com/

Page 123 of 376

2-9.1.1 IPMC Profile Rule Settings Table

This page provides the filtering rule settings for a specific IPMC profile. It displays the configured rule

entries in precedence order. First rule entry has highest priority in lookup, while the last rule entry has

lowest priority in lookup.

Profile Name:

The name of the designated profile to be associated. This field is not editable.

Entry Name:

The name used in specifying the address range used for this rule.

Only the existing profile address entries will be chosen in the selected box. This field is not allowed to be

selected as none ("-") while the Rule Settings Table is committed.

Address Range:

The corresponding address range of the selected profile entry. This field is not editable

and will be adjusted automatically according to the selected profile entry.

Action:

Indicates the learning action upon receiving the Join/Report frame that has the group address

matches the address range of the rule.

Permit

: Group address matches the range specified in the rule will be learned.

Deny

: Group address matches the range specified in the rule will be dropped.

Log:

Indicates the logging preference upon receiving the Join/Report frame that has the group address

matches the address range of the rule.

Enable

: Corresponding information of the group address, that matches the range specified in the rule,

will be logged.

Disable

: Corresponding information of the group address, that matches the range specified in the rule,

will not be logged.

Rule Management Buttons:

You can manage rules and the corresponding precedence order by using

these buttons:

: Insert a new rule before the current entry of rule.

: Delete the current entry of rule.

: Moves the current entry of rule up in the list.

: Moves the current entry of rule down in the list.

Buttons

Add Last Rule

– Click to add a new rule in the end of the specific profile's rule list. Specify the address

entry and configure the new entry. Click "Commit".

Commit

– Click to commit rule changes for the designated profile.

Reset

– Click to undo any changes made locally and revert to previously saved values.

Example

Содержание SM24TBT2DPA









































































































































































































































































































































































Результаты поиска

Содержание SM24TBT2DPA

Отзывы:

Lantronix SM24TBT2DPA, Руководство пользователя для веб, Страница: 123 / 360

Результаты поиска

Содержание SM24TBT2DPA

Отзывы: