Lantronix SLC 8000 Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 425

Lantronix SLC 8000 Series Скачать руководство пользователя страница 54

4: Quick Setup

SLC™ 8000 Advanced Console Manager User Guide

54

displays.

Note:

If the prompt does not display, make sure you are no longer in edit mode.

11. Use the left/right arrow buttons to select

Yes

, and press the

Enter

button.

12. To review the saved settings, press the up or down arrows to step through the current settings.
When you are done, the front panel returns to the clock display. The network port resets to the

new settings, and you can connect to your IP network for further administration. You should be

able to SSH to the SLC 8000 advanced console manager through your network connection, or

access the Web interface through a Web browser.

Restoring Factory Defaults

To use the LCD display to restore factory default settings:

1. Press the right arrow button to move to the

Release

option.

2. Use the down arrow to move to the

Restore Factory Defaults

option. A prompt for the 6-digit

Restore Factory Defaults password displays.

3. Press

Enter

to enter edit mode.

4. Using the left and right arrows to move between digits and the up and down arrows to change

digits, enter the password (the default password is 999999).

Note:

The Restore Factory Defaults password is only for the LCD. You can change

it at the command line interface using the CLI

admin keypad password

command.

The front panel Factory Default password and sysadmin password should be

recorded and stored in a secure place accessible by at least two authorized system

administrators. Recovering an SLC if both of these passwords are unknown is

cumbersome and time consuming.

5. Press

Enter

to exit edit mode. If the password is valid, a Save Settings? Yes/No prompt

displays.

6. Select

Yes

and press

Enter

. When the process is complete, the SLC unit reboots.

Limiting Sysadmin User Access

For security purposes, full administrative access to the SLC via the default sysadmin local user

account can be limited to only the front console port of the SLC device.

To configure this:

1. Enable the Sysadmin access limited to Console Port option on the Local/Remote Users web

page.’

2. Enable a remote authentication method (such as or LDAP) and configure the

remote authentication method to be first in the order of methods used.

3. Create a remote user account with full administrative rights.
4. Uncheck the

Attempt next method on authentication rejection

checkbox on the

Authentication Methods web page.

These steps will prevent any local users from logging in, restrict the default sysadmin local user to

the front console port, and allow a user with administrative rights to login, as long as remote

authentication is working.

«
...
52
53
54
55
56
...
»

Содержание SLC 8000 Series










































































































































































































































































































































































































































Отзывы:

Нет отзывов