Lantronix SLC 8000 Series Скачать руководство пользователя страница 297

Страница: 297 / 425

13: Maintenance

SLC™ 8000 Advanced Console Manager User Guide

297

2. Enter the following:

Internal Temperature

Site Information

SLC Firmware

Note:

The non-active boot bank is updated during the firmware update, without requiring

a reboot. The configuration on the current boot bank may optionally be copied to the non-

active boot bank during the firmware update.

Reboot

Select this option to reboot the SLC 8000 advanced console manager

immediately. The default is

Note:

The front panel LCD displays the “Rebooting the SLC” message, and the

normal boot sequence occurs.

Shutdown

Select this option to shut down the SLC unit. The default is

Current

Displays current temperature.

Low

Sets the acceptable minimum for the internal temperature of the SLC 8000

advanced console manager. If the temperature of the SLC device changes to be

outside of this range, the SLC console manager will issue an SNMP trap.

High

Sets the acceptable maximum for the internal temperature of the SLC unit. If the

temperature of the SLC 8000 advanced console manager changes to be outside

of this range, the SLC unit will issue an SNMP trap.

Calibrate Offset

An offset for calibrating the internal temperature of the SLC console manager. The

offset will be applied one hour after setting the calibration value. Zeroing the

offset will take effect immediately and will cancel any current and/or pending

calibration.

Data Center Rack Row

Set these fields to define the rack row the SLC unit is located within a large data

center. The default for these fields is 1.

Data Center Rack

Cluster

Set these fields to define the rack cluster the SLC 8000 advanced console

manager is located within a large data center. The default for these fields is 1.

Data Center Rack

Set these fields to define the rack the SLC unit is located within a large data

center. The default for these fields is 1.

Site Tag

Tag or description used to identify the location or some other attribute of the SLC.

Current Version

Displays the current firmware version.

Clear FW Update Log

(checkbox)

Clears the contents of the Firmware Update log file.

Firmware Update Log

(link)

To view a log of all prior firmware updates, click the

Firmware Update Log

link.

Update Firmware



To update the SLC firmware, select the checkbox. If you select this option, the

SLC unit reboots after you apply the update. The first time boot for each bank

may take up to 5 minutes. Subsequent boot times will be approximately 2

minutes.



To view a log of all prior firmware updates, click the

Firmware Update Log

link.

Firmware Filename

The name of the firmware update file downloaded from the Lantronix web site.

Содержание SLC 8000 Series










































































































































































































































































































































































































































Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Lantronix SLC 8000 Series, Руководство пользователя, Страница: 297 / 425

Результаты поиска

Содержание SLC 8000 Series

Отзывы: