Lantronix SLC 8000 Series Скачать руководство пользователя страница 113

Страница: 113 / 425

6: Basic Parameters

SLC™ 8000 Advanced Console Manager User Guide

113

To view results for a Performance Monitoring probe:

1. Click the

Network

tab and select the

Perf Monitoring

option. The

Network > Perf Monitoring

page displays.

2. Select a probe from the table in the lower part of the page and select the

Operations

link. The

Performance Monitoring - Operations

page displays.

Figure 6-13 Performance Monitoring - Operations

3. A table will list all available operations for the selected probe, with the most recent operation

listed first. The table may be empty if no operations have been run for the probe or the

operations for the probe have been deleted. Select an operation by clicking the radio button to

Not Connected

A packet could not be sent because the connection to the destination host

could not be established, or because the attempt to send the packet failed.

Sequence Error

A packet response was received with an unexpected sequence number.

Possible reasons are: a duplicate packet was received, a response was

received after it timed out, a corrupted packet was received and was not

detected.

Verify Data Error

A response was received for a packet with payload data that does not match

the expected data.

DNS Server Timeout

A DNS lookup could not be completed because the SLC could not connect to

the DNS name server.

DNS Lookup Error

A DNS lookup failed - the requested hostname could not be resolved. This is

not considered a protocol error, but rather an expected result, depending on

the hostname being resolved. The RTT results will be included in the

accumulated statistics.

TCP Connect Timeout

A TCP connect could not be completed because a connection to the TCP

server could not be established.

HTTP Transaction Timeout

An HTTP Get that failed because no response was received from the HTTP

server before the timeout expired.

HTTP Error

An HTTP Get succeeded, but the HTTP content (base page) that was

downloaded had errors: missing "HTTP/" header string, missing

"Connection: close" string, or response has an HTTP error code (the code

was not 200/OK). This is not considered a protocol error. The RTT results

will be included in the accumulated statistics.

Generic Error

Any error that does fall into any of the above error conditions.

Error Condition

Description

Содержание SLC 8000 Series










































































































































































































































































































































































































































Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Lantronix SLC 8000 Series, Руководство пользователя, Страница: 113 / 425

Результаты поиска

Содержание SLC 8000 Series

Отзывы: