6: Basic Parameters
SLB™ Branch Office Manager User Guide
58
Routing
The SLB branch office manager allows you to define static routes and, for networks using
Routing Information Protocol (RIP)-capable routes, to enable the RIP protocol to
configure the routes dynamically.
To configure routing settings:
1. Click the
Network
tab and select the
Routing
option. The following page displays:
2. Enter the following:
Dynamic Routing
Enable RIP
Select to enable Dynamic Routing Information Protocol
(RIP) to assign routes automatically. Disabled by default.
RIP Version
Select the RIP version. The default is
2
.
Static Routing
Enable Static
Routing
Select to assign the routes manually. The system
administrator usually provides the routes. Disabled by
default.
To add a static route, enter the
IP Address
,
Subnet
Mask
, and
Gateway
for the route and click the
Add/Edit Route
button. The route displays in the Static
Routes table. You can add up to 64 static routes.
To edit a static route, select the radio button to the right
of the route, change the
IP Address
,
Subnet Mask
,
and
Gateway
fields as desired, and click the
Add/Edit
Route
button.
To delete a static route, select the radio button to the
right of the route and click the
Delete Route
button.
3. Click the
Apply
button.