Lantronix SISPM1040-3 L Series Скачать руководство пользователя | Manualshive

Страница: 28 / 48

background image

Lantronix

SISPM1040-3xxx-L Install Guide

33762 Rev. G

https://www.lantronix.com/

Page

28

of

48

Installing SFP Modules

You can install or remove a mini-GBIC SFP module from an SFP port without
having to power off the switch.

Note

: The SFP ports should use UL Listed Optional Transceiver product,

Rated 3.3Vdc, Laser Class 1.
See the SFP manual for specific cautions, warnings, and instructions.
See the

for our full range of Optical Devices.

1.

Insert the module into the SFP port.

2.

Press firmly to ensure that the module seats into the connector.

Connecting Powered Devices (PDs)

Note that this device does not comply with IEEE 802.3at at 48-51.4 VDC, or with IEE 802.3bt at 48-53.4 VDC.
The old device label states 48-57 VDC. The latest device label indicates:

•

802.3af: 48-57VDC

•

802.3at: 52-57VDC

•

802.3bt: 54-57VDC

This device drops ~1.3V from Vin to PSEout. IEEE requires these PSEout voltages at the PSE output into the cable:

•

802.3af: 44VDC

•

802.3at: 50VDC

•

802.3bt: 52VDC

Not meeting this PSEout requirement may cause power up failures or power cycling with devices drawing
maximum power with maximum cable loss.

Connecting Power

The SISPM1040-3248-L/SISPM1040-3166-L has one AC power input and Dual DC power inputs. It doesn’t support a
secondary AC Power Supply option. It provides redundancy between AC and dual DC power inputs and the AC
power input has high priority. The switch can use DC and AC at the same time. For redundancy, AC takes priority
over DC; see the Install Guide.

Power Connection

:

Warning

:

Connect the power supply to the switch first, and then connect the power supply to

power. Otherwise catastrophic product failure may occur.

1.

Verify that power is off to the DC circuit that you are

going to attach to the switch PoE DC-input connector. This can be either of the two power supplies (AC-input or DC-
input) or site source DC.

2.

As an added precaution, place an appropriate safety flag and lockout device at the

source power circuit breaker, or place a piece of adhesive tape over the circuit breaker handle to prevent
accidental power restoration while you are working on the circuit.

Power Disconnection

:

To disconnect power from the switch after a successfully boot:

1.

Turn off power to the

switch.

2.

Disconnect the cables.

«
...
26
27
28
29
30
...
»

Содержание SISPM1040-3 L Series

















































Отзывы:

Нет отзывов

Похожие инструкции для SISPM1040-3 L Series

Бренд: 3Com Страницы: 128

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 422

3CR16708-91 - OfficeConnect Managed Switch 9

Бренд: 3Com Страницы: 4

Бренд: 3Com Страницы: 5

Бренд: 3Com Страницы: 30

Бренд: 3Com Страницы: 36

Бренд: 3Com Страницы: 4

Baseline 2226-PWR Plus

Бренд: 3Com Страницы: 77

Бренд: 3Com Страницы: 570

OfficeConnect WX1200

Бренд: 3Com Страницы: 28

Baseline 2226-PWR Plus

Бренд: 3Com Страницы: 4

CoreBuilder 6000

Бренд: 3Com Страницы: 31

Бренд: Accton Technology Страницы: 7

Бренд: Cabletron Systems Страницы: 14

Бренд: Black Box Страницы: 74

Бренд: enbrighten Страницы: 2

IPES-5208T-X Series

Бренд: Lantech Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды