Lantronix SDS1101 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 96

background image

SDS1101 /2101 User Guide

2

Copyright & Trademark

© 2009 and 2010, Lantronix. All rights reserved. No part of the contents of this book
may be transmitted or reproduced in any form or by any means without the written
permission of Lantronix. Printed in the United States of America.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of
The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are
trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications
Corporation.

Contacts

Lantronix

167 Technology Drive
Irvine, CA 92618 USA
Toll Free: 800-526-8766
Phone:

949-453-3990

Fax:

949-450-7249

Technical Support

Online:

www.lantronix.com/support

.

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix
Web site at

http://www.lantronix.com/about/contact/index.html

.

Disclaimer

Operation of this equipment in a residential area is likely to cause interference in
which case the user, at his or her own expense, will be required to take whatever
measures may be required to correct the interference.

Note:

This product has been designed to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against such interference when operating in a
commercial environment. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with this
guide, may cause harmful interference to radio communications.

Changes or modifications to this device not explicitly approved by Lantronix will void
the user's authority to operate this device.

The information in this guide may change without notice. The manufacturer assumes
no responsibility for any errors that may appear in this guide.

Note:

Export Control Classification Number 5A002, License exception ENC. The

following export agreement is required for encryption:

I agree that I will not export or re-export this product or firmware to a national resident
of Cuba, Iran, Iraq, Libya, North Korea, Sudan, Syria or any other country to which
the United States has embargoed goods; or to anyone on the US Treasury
Department's list of Specially Designated Nationals and Blocked Persons, US
Commerce Department's Table of Denial Orders and Entitles List, or the US State
Department's Debarred List. By receiving this product, I am agreeing to the foregoing
and I am representing and warranting that I am not located in, under the control of, or
a national or resident of any such country or on any such list.

«
1
2
3
4
...
»

Содержание SDS1101

































































































Отзывы:

Нет отзывов

Похожие инструкции для SDS1101

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 31

Бренд: Samsung Страницы: 15

Бренд: LAWO Страницы: 154

Бренд: Farallon Страницы: 26

Бренд: Observint Страницы: 11

8677 - BladeCenter Rack-mountable - Power...

Бренд: IBM Страницы: 126

Бренд: ebm-papst Страницы: 6

Бренд: ebm-papst Страницы: 6

Бренд: ebm-papst Страницы: 5

Бренд: ?omtime Страницы: 62

Бренд: Idis Страницы: 31

Бренд: Patton electronics Страницы: 65

Бренд: TRENDnet Страницы: 2

Бренд: U.S. Products Страницы: 80

Бренд: Avolites Страницы: 24

Бренд: ZyXEL Communications Страницы: 485

Бренд: Tait Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды