Lantronix S3100 Series, Инструкция по установке

Страница: 15 / 19

Lantronix S3100 Install Guide
33581 Rev. C https://www.lantronix.com/ Page 15 of 19
Troubleshooting
Procedure
1. Is the PWR (power) LED lit?
NO
• Is the S3100 inserted properly into the chassis?
• Is the power cord properly installed in the S3100 and in the grounded AC outlet?
• Does the grounded AC outlet provide power?
• Contact Tech Support.
YES
• Proceed to step 2.
2. Is the LINK LED lit?
NO
• Check that the SFP device is supported and properly connected. See “
Installing SFP Devices ”
on page 9 .
• Check the fiber cables for proper connection.
• Re-seat the SFPs. Note that with two copper SFP modules are used in the converter, no link is
established. At least one of the two SFPs must be a fiber SFP.
• Verify that the cable specs are met. See “ Cable Specifications ” on page 27 .
• Contact Tech Support.
Product and Packaging Labels
The product and packaging labels provide valuable information that you can provide to help the Technical
Support Specialist in solving a problem.
Product Label Packaging Label