5: Commands and Levels
write
Stores the current configuration in permanent memory.
traps (config-snmp-traps) level commands
authentication password
<text>
Sets password used for authentication for traps.
authentication protocol md5
Uses MD5 for authentication for traps.
authentication protocol sha
Uses SHA for authentication for traps.
clrscrn
Clears the screen.
community
<text>
Sets the SNMP trap community string. <text> = name of
the trap community string to be set.
default authentication protocol
Restores to default SNMPv3 authentication method: MD5
for traps.
default community
Restores the SNMP trap community to default: public
default privacy protocol
Restores to default SNMPv3 privacy encryption method:
DES for traps.
default security
Restores to default SNMPv3 security method: Authentica-
tion, No Privacy for traps.
default version
Restores to default SNMP version v2c for traps.
exit
Exits to the next higher level.
no authentication password
Clears authentication password for traps.
no primary destination
Deletes the primary SNMP trap host.
no privacy password
Clears privacy password for traps.
no secondary destination
Deletes the secondary SNMP trap host.
no username
Clears SNMPv3 username for traps.
primary destination
<text>
Sets the primary SNMP trap host. <text> = IP address or
hostname of SNMP trap receiver.
privacy password
<text>
Sets password used for privacy encryption for traps.
privacy protocol aes
Uses AES for privacy encryption for traps.
privacy protocol des
Uses DES for privacy encryption for traps.
secondary destination
<text>
Sets the secondary SNMP trap host. <text> = IP address
or hostname of SNMP trap receiver.
security authentication and privacy
Authentication and Privacy for traps.
security authentication but no privacy
Authentication, No Privacy for traps.
security no authentication and no priv
No Authentication, No Privacy for traps.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
username
<text>
Sets SNMPv3 username for traps.
version snmpv1
Uses SNMPv1 for traps.
version snmpv2c
Uses SNMPv2c for traps.
version snmpv3
Uses SNMPv3 for traps.
write
Stores the current configuration in permanent memory.
trusted authorities (ssl-auth) level commands
add
Adds an Authority Certificate.
clrscrn
Clears the screen.
exit
Exits to the ssl level.
no intermediate authority
<cert>
Removes an Intermediate Authority Certificate. <cert> =
PremierWave® XC Intelligent Gateway Command Reference
250