1.
Insert the SIM card in the SIM compartment found at the
bottom of the PremierWave XC HSPA+ Intelligent Gateway.
Remove the screws from SIM compartment
cover.
Slide the SIM holder to the unlock position
(opposite of the LOCK arrow).
Lift the SIM holder and insert the SIM.
Make sure the SIM is oriented as shown.
Slide the SIM holder to the lock position (in
direction of the LOCK arrow). Replace the
cover.
2.
Attach the two external antennas to the device.
3.
Mount or place the device securely.
4.
Connect the Ethernet cable to the RJ45 port of the device.
5.
Supply power to the device by using the power adapter
included the packaging.
WHAT’S
IN THE
BOX
PremierWave XC
RJ-45 Ethernet
Straight
Cat5 Cable
Quick Start Guide
1 HARDWARE REVIEW
2 HARDWARE INSTALLATION
PremierWave® XC HSPA+ Quick Start Guide
SIM Compartment
Serial 2
Ethernet
Port
Antenna
Serial 1
Rx Div
Reset Pin USB
Digital
I/O
9-30VDC
Locking Barrel
Power
Connector
Mounting Bracket
(one on each side)
2 x External
Antennas with
SMA Connector
Power Supply
(Actual power supply may differ
from that depicted here.)
Mounting Components:
• DIN Rail Mounting Adapter
• Cover Plates
