Lantronix MSS100 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 71

Lantronix MSS100 Скачать руководство пользователя страница 52

Troubleshooting

BOOTP Troubleshooting

B-3

B.3 BOOTP Troubleshooting

If the BOOTP request is failing and you have configured your host to respond to the
request, check these areas:

B.4 RARP Troubleshooting

If the unit is unable to get an IP address using RARP, check these areas:

Table B-3: BOOTP Troubleshooting

Area to Check

Explanation

BOOTP is in your system’s
/etc/services file.

BOOTP must be an uncommented line in /etc/services.

The MSS is in the loadhost’s
/etc/hosts file.

The MSS must be in this file for the host to answer a
BOOTP or TFTP request.

The download file is in the
correct directory and is world-
readable.

The download file must be in the correct directory and
world-readable. Specify the complete pathname for the
download file in the BOOTP configuration file, or add a
default pathname to the download filename.

The MSS and host are in the
same IP network.

Some hosts will not allow BOOTP replies across routed IP
networks. Either use a host running a different operating
system or put the MSS in the same IP network as the host.

Table B-4: RARP Troubleshooting

Area to Check

Explanation

The MSS name and hardware
address in the host’s /etc/ethers file.

The MSS name and hardware address must be in this
file for the host to answer a RARP request.

The MSS name and IP address in the
/etc/hosts file.

The MSS name and IP address must be in this file for
the host to answer a RARP request.

The operating system.

Many operating systems do not start a RARP server
at boot time. Check the host’s RARPD
documentation for details, or use the ps command to
see if there is a RARPD process running.

«
...
50
51
52
53
54
...
»

Содержание MSS100








































































Отзывы:

Нет отзывов