manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 83

Commands

Change Silentboot

6 - 23

6.51    Change Silentboot

Causes the unit to attempt to boot without sending any status messages to the console port (unless 
there are errors). 

Restrictions

Requires privileged user status.

Default

Disabled

See Also

Show Server, page 6-33.

6.52    Change SNMPSetComm

Creates an SNMP community name for the MSS and gives that community read/write access. 

Restrictions

Requires privileged user status.

Parameters

communityname
Enter an alphanumeric string of up to 15 bytes.

See Also

TCP/IP, page 1-4.

6.53    Change Software

Specifies the name of the download file the MSS will attempt to load at boot time when a reload 
has been requested. For IP loadhosts, this is the file that will be requested at boot time. 

Restrictions

Requires privileged user status.

Parameters

filename
Specify the name of the loadfile, 11 characters or less. A .SYS extension 
will be added. The complete pathname can also be entered if the file is to 
be loaded via TFTP. The filename must be placed in quotes to preserve 
case.

See Also

Change Loadhost, page 6-13.

 CHANGE SILENTBOOT 

DISABLED

ENABLED

 CHANGE SNMPSETCOMM communityname

 CHANGE SOFTWARE   filename

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды