manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 29

Getting Started

Incoming Logins

3 - 3

3.1.3  Using the Serial Console

Connect a terminal to the serial console and press the Return key.

If the MSS is running normally when you press the Return key, a Local prompt will be displayed. 
You can become the privileged user and enter the Change IPaddress command at this prompt.

Figure 3-3:  

Entering the IP Address at the Local Prompt

If the MSS has encountered a problem with the Ethernet network, it will print an alert message to 
the console and wait ten seconds to detect serial port activity before attempting to finish booting. If 
you press a key during that ten second time period, the MSS will display the Boot prompt at which 
you can enter the Change IPaddress command to set the unit’s IP address.

NOTE:

For more information on Boot Configuration Program (BCP) commands, see Appen-
dix B.

3.2  Incoming Logins

3.2.1  Controlling Incoming Logins

Incoming Telnet logins are enabled by default, and incoming LAT logins are disabled. This behavior 
can be changed with the Change Incoming command and one of the following parameters:

Telnet

Enables Telnet logins

LAT

Enables LAT logins

Both

Enables both Telnet and LAT logins

None

Disables Telnet and LAT logins

For security reasons, you may wish to disable incoming logins. If it is undesirable to disable 
incoming logins, the MSS can be configured to require a login password for incoming connections 
with the Change Incoming Password command. The incoming password feature can be disabled 
with the Change Incoming Nopass command.

3.2.2  EZWebCon Login and Configuration

EZWebCon enables users on TCP/IP networks to log into and configure the MSS. The program 
offers a simple interface that prompts the user for the information necessary to configure the server.

Instructions for installing, running, and using EZWebCon are included on the CD-ROM. Refer to 
the EZWebCon README file for specific platform and host requirements.

Local>> CHANGE IPADDRESS 192.0.1.228

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды