manualshive.com logo in svg

Lantronix MSS1-T, Справочное руководство

Поделиться
Скачать
Lantronix MSS1-T Скачать руководство пользователя страница 13

 

Introduction

Configuration

 

1 - 5

 

1.5  Configuration

 

Each MSS has a unique name and network address printed on its underside. The name is based on 
the MSS Ethernet address and is referred to in the manual as 

 

MSS_xxxxxx

 

. The xxxxxx string 

represents the last six digits of the MSS Ethernet address. Be sure to note the Ethernet address 
before configuring the unit.

When using IPX or LAT, it is possible to power up the MSS and have it work properly with no 
additional configuration required. TCP/IP users must give the unit an IP address. 

 

NOTE:

 

For more information about methods used to configure an IP address, see page 3-1.

 

Lantronix has provided EZWebCon software to help users install and configure the MSS. It is also 
possible to configure the MSS settings by logging into it over a network via Telnet or Rlogin. See 
Chapter 3, 

 

Getting Started

 

, for more information.

Additionally, the MSS can be configured to download a configuration file containing boot 
commands from a NetWare or TCP/IP host at boot time. See the 

 

Change Startup

 

 command  for 

more information. 

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды