Lantronix MSS1-T Скачать руководство пользователя | Manualshive

Страница: 109 / 117

background image

Updating Software

Obtaining New Software

E - 1

E - Updating Software

The latest version of the Lantronix MSS operating software and its associated release notes can be
downloaded directly from the Lantronix development systems in one of two ways: anonymous
FTP through the Internet or via dial-in modem.

Comments and/or requests for help via email are welcome - send them to [email protected]
and they will be routed appropriately. Questions or comments regarding the FTP/download pro-
cess itself can be sent to [email protected]. Mail can also be sent from within the dial-in modem
menu access.

E.1 Obtaining New Software

E.1.1 Via FTP

Server software resides on the Lantronix FTP server (ftp.lantronix.com) whose current IP address
is 192.73.220.84. This is subject to change at any time; the text name should be used if possible.

The files are stored in normal and Unix compress formats (filename.z); if you have access to the
Unix compress utility, you should download the compressed versions. These files are binary data,
so the binary option must be used to transfer the files.

To log into the FTP server, use the username anonymous and enter your full email address as the
password. If the FTP server cannot verify the username or email address, you will be denied
access. The machine that issues the FTP command must be resolvable via the INADDR.ARPA
DNS record for the connection to succeed. If access is denied, try using a “known” machine such
as a gateway or nameserver.

Once a connection has been made, the following text will be displayed:

Figure E-1:

Lantronix FTP Session

All released files are in the pub directory. Always download the README file first; it contains a
directory of available software versions.

220-Welcome to the Lantronix FTP Server.

220-Direct questions to [email protected] or 1.800.422.7044.

220-Questions about this ftp account only to ftp.lantronix.com.

220-nexus FTP server (Ver. wu-2.4(1) Wed Sep 7 12:32:43 PDT 1994)

Name (ftp.lantronix.com:jerry): anonymous

331 Guest login ok, send your complete e-mail address as password

Password: [email protected]

[your e-mail address, not echoed]

230-Welcome to the Lantronix FTP Server.

230-IMPORTANT: Please get the README file before proceeding.

230-IMPORTANT: Set BINARY mode before transferring executables.

230-

230 Guest login ok, access restrictions apply

Remote system type is UNIX.

[your type displayed here]

Using binary mode to transfer files.

ftp>

«
...
107
108
109
110
111
...
»

Содержание MSS1-T






















































































































Отзывы:

Нет отзывов

Похожие инструкции для MSS1-T

eserver xSeries 306

Бренд: IBM Страницы: 46

SuperWorkstation 740A-T

Бренд: Supermicro Страницы: 138

Бренд: Flexport Страницы: 39

CE-HE130S4 Series

Бренд: Ablecom Страницы: 43

A+ AS-2124US-TNRP

Бренд: Supermicro Страницы: 130

BladeCenter PS703

Бренд: IBM Страницы: 198

Intesis IBMBSDAL0640000

Бренд: HMS Networks Страницы: 39

Palcare PAL-211401

Бренд: PalatiumCare Страницы: 64

TVS- 72XU Series

Бренд: QNAP Страницы: 56

Express5800/E120d-1

Бренд: NEC Страницы: 4

Express5800/B140a-T

Бренд: NEC Страницы: 19

Express5800/B120f-h

Бренд: NEC Страницы: 21

Express5800/GT110b

Бренд: NEC Страницы: 27

Express5800/GT110e-S

Бренд: NEC Страницы: 34

Express5800/B110d

Бренд: NEC Страницы: 19

Express5800/A2040d

Бренд: NEC Страницы: 20

Express5800/D120h

Бренд: NEC Страницы: 35

Express5800/A1040e

Бренд: NEC Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды