Lantronix Maestro E220 Series, Руководство пользователя, Страница: 20 / 27

4: Installation
E220 Series User Guide 20
2. Modify the LAN, WAN, Cellular, and Wi-Fi network settings as necessary. See Default
Interface Configuration
for details of default connection settings.
3. Click Save & Apply to store the configuration.
Notes:
• In Cellular, all fields such as APN depend on SIM cards provider/cellular network
operator, enquire with them for authentication credentials if needed.
•
After storing the network configuration, the cellular connection should be established
within one minute, provided there is adequate signal reception (if the default setting is
used.
4. To see the status of the network connections, click Status in the main menu and view the
Overview page.
4.5.6 Default Configuration
All usernames and passwords are case sensitive.
4.5.6.1 Default Configuration for Web Admin Page
If the installed ePack firmware is version 2.4.4 and higher, the default factory passwords are:
User Default Password
admin admin
root L@ntr0n1x
Table 4-3: Default Web Admin Page Credentials
Note
• ePack firmware versions 2.4.4 and above require you to change the factory default
passwords before any other router configuration can be done. Both the admin and root
passwords must be changed.
If the installed ePack firmware is older than version 2.4.4, the default factory passwords are:
User Default Password
admin admin
root
M@estroW1rele$$
Table 4-4: Default Web Admin Page Credentials
Note: Username and password are both case sensitive.
4.5.6.2 Wireless Access Point SSID
The wireless access point SSID may be configured in the Web Admin console.
Parameter Details
SSID
Lantronix E21X - for E210 series devices
Lantronix E22X - for E220 series devices
WPA/WPA2 TKIP Key W1rele$$
Table 4-5: Default Wi-Fi Credentials