Appendix
FOX3-2G/3G/4G Series Hardware Manual
49
the FOX3-2G/3G/4G operating firmware, you have to setup a specific configuration and store it in
the device. All PFAL commands can be sent to the FOX3-2G/3G/4G with the help of the Workbench
software, which is free of charge and can be downloaded from our website. All PFAL commands
supported by the FOX3-2G/3G/4G and other AVL devices are listed and described in a separate
manual called
“AVL_PFAL_Configuration_Command_Set.pdf”
which is accessible online on our
website under the password-protected area.
9.3.
GPRS Coding scheme
Coding scheme
1 Timeslot
2 Timeslots
4 Timeslots
CS-1:
9.05 kbps
18.1 kbps
36.2 kbps
CS-2:
13.4 kbps
26.8 kbps
53.6 kbps
CS-3:
15.6 kbps
31.2 kbps
62.4 kbps
CS-4:
21.4 kbps
42.8 kbps
85.6 kbps
Table 13
:
Coding schemes and maximum net data rates over air interface
Please note that, the values listed above are the maximum ratings which, in practice, are influenced by a great
variety of factors, primarily, for example, traffic variations and network coverage.
