Lantronix EMG 8500, Руководство пользователя

Страница: 211 / 416

11: Scripts
EMG™ Edge Management Gateway User Guide 211
To delete the completed operations (runs) for a custom script:
1. In the Scripts table, select the script to view operations for, and click Script Operations .
2. The Custom Scripts - Operations page displays, with a list of any results that have been
generated for a script, in reverse date/time order. All the results can be deleted by clicking
Delete Results .
To view the latest results from a completed operation (run) of a custom script:
1. Click the Devices tab and select the Scripts option. The Scripts page displays.
2. In the Scripts table, select the script to view results for, and click Latest Results Results.
The results are displayed in a popup window.
To use a script at the CLI:
1. To run an Interface Script or a Custom Script on a device port for pattern recognition and
action generation, use the
connect script <Script Name> deviceport <Device
Port # or Name>
command. This action requires that a EMG user running the connect
script command have Device Port Operations (do) rights and port permissions for the selected
device port.
2. To run a Batch Script at the CLI with a series of CLI commands, or a Custom Script for pattern
recognition and action generation, use the
set script runcli <Script Name>
command. This action requires that an EMG user running the runcli command belong to a
group that is the same or greater than the group assigned to the script (e.g., if the script is
assigned to the Power group, the user running the runcli command must belong to the Power
or Admin group). For Batch Scripts, if this minimum group requirement is met, the EMG user
will temporarily be granted all of the individual rights assigned to the script while the Batch
Script is running.
Note: Expect Custom Scripts have a
debug enable
option that supports printing
Expect debug information to aid in creating an Expect script. The debug option is not
supported for Tcl and Python scripts.
Script Commands
Go to
Script Commands
to view CLI commands which correspond to the web page entries
described above.
Batch Script Syntax
The syntax for Batch Scripts is exactly the same as the commands that can be typed at the CLI,
with the additions described in this section.
The
sleep
command suspends execution of the script (puts it to 'sleep') for the specified number
of seconds. Syntax:
sleep <value>
The
while
command allows a loop containing CLI commands to be executed. Syntax:
while {<Boolean expression>} {
CLI command 1
CLI command 2