Lantronix EMG 8500 Скачать руководство пользователя страница 112

Страница: 112 / 416

6: Networking

EMG™ Edge Management Gateway User Guide

112

To view results for a Performance Monitoring probe:

1. Click the

Network

tab and select the

Perf Monitoring

option. The

Network > Perf Monitoring

page displays.

2. Select a probe from the table in the lower part of the page and select the

Operations

link. The

Performance Monitoring - Operations

page displays.

Figure 6-14 Performance Monitoring - Operations

3. A table will list all available operations for the selected probe, with the most recent operation

listed first. The table may be empty if no operations have been run for the probe or the

operations for the probe have been deleted. Select an operation by clicking the radio button to

the far right in the operation's row. The options that are available for that operation will be

ungreyed. Select one of the following options:

Performance Monitoring Commands

Go to

Performance Monitoring Commands

to view CLI commands which correspond to the web

page entries described above.

Refresh

Refreshes the information on the Performance Monitoring - Operations page.

RTT Results

Displays the round trip time (RTT) results for the selected operation in a

separate window. The results show:



the time that the packet was sent,



the total round trip time for non-jitter probes or the source to destination time

and destination to source time for jitter probes, and



the status for the packet - OK/successful or an error condition.

For more information, see

Round Trip Times

Error Conditions Detected by

Probes

Accumulated Results

Displays the accumulated statistics for the selected operation in a separate

window. The results show parameters used for the selected operation, and the

minimum, average and maximum round trip times for all probes. For jitter

probes, the results show minimum, average and maximum one way latency

times, as well as jitter results for source to destination and destination to

source. For a probes, a summary of lost packets and error conditions is

displayed.

Содержание EMG 8500

































































































































































































































































































































































































































Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды

Lantronix EMG 8500, Руководство пользователя

Результаты поиска

Содержание EMG 8500

Отзывы:

Похожие инструкции для EMG 8500

Бренды по названию

Популярные бренды