Lantronix EMG 7500, Руководство пользователя

Страница: 253 / 482

12: Scripts
EMG™ Edge Management Gateway User Guide 253
Interface Script Syntax
This section describes the abbreviated scripting syntax for Interface Scripts. This limited syntax
was created to prevent the creation of scripts containing potentially harmful commands. Script
commands are divided into three groups: Primary, Secondary and Control Flow.
Primary commands provide the basic functionality of a script and are generally the first element on
a line of a script, as in:
send_user "Password:"
Secondary commands provide support for the primary commands and are generally not useful by
themselves. For example, the
expr
command can be used to generate a value for a
set
command
.
set <my_var> [expr 1 + 1]
Control Flow
commands allow conditional execution of other commands based on the results
of the evaluation of a Boolean expression.
Table 12-4 Interface Script Syntax Definitions
Term Definition
Word A contiguous group of characters delimited on either side by spaces. Not enclosed
by double quotes.
Primary Command One of the primary commands listed in this section.
Secondary Command One of the secondary commands defined in this section.
Quoted String A group of characters enclosed by double quote (") characters. A quoted string
may include any characters, including space characters. If a double quote
character is to be included in a quoted string it must be preceded (escaped) by a
backslash character ('\').
Variable Reference A word (as defined above) preceded by a dollar sign character ('$').
CLI Command
A quoted string containing a valid CLI
show
command.
Arithmetic Operator A single character representing a simple arithmetic operation. The character may
be one of the following:

A plus sign (+) representing addition

A minus sign (-) representing subtraction

An asterisk sign (*) representing multiplication

A forward slash (/) representing division

A percent sign (%) representing a modulus
Boolean Expression An expression which evaluates to TRUE or FALSE. A Boolean expression has the
following syntax:
<value> <Boolean operator> <value>
Each can be either a word or a variable reference.
Boolean Operator A binary operator which expresses a comparison between two operands and
evaluates to TRUE or FALSE. The following Boolean operators are valid:

'<' less than

'>' greater than

'<=' less than or equal to

'>=' greater than or equal to

'==' equal to

'!=' not equal to