Lantronix EDS2100, Руководство пользователя

Страница: 79 / 149

10: Service Settings
EDS1100/2100 Device Server User Guide 79
HTTP Configuration
On this page you may change HTTP configuration settings.
To configure HTTP:
1. Select HTTP on the menu bar and then Configuration at the top of the page. The HTTP
Configuration page opens.
Figure 10-13 HTTP Configuration
2. Enter or modify the following settings:
Table 10-14 HTTP Configuration
HTTP Configuration
Settings Description
State Select Enabled to enable the HTTP server.
Port Enter the port for the HTTP server to use. The default is 80 .
Secure Port Enter the port for the HTTPS server to use. The default is 443 . The HTTP
server only listens on the HTTPS Port when an SSL certificate is configured.