Lantronix CoBox-Micro, Руководство пользователя, Страница: 45 / 110

7-1
7: Configuration
Certain parameters must be configured before the Device Server can function on a network.
The Device Server can be locally or remotely configured using the following procedures:
!
Use a Telnet connection to configure the unit over the network.
!
Use a terminal or terminal emulation program to access the first serial port (CH 1)
locally.
!
Use a standard Web browser to access the Device Server’s internal Web pages and
configure the unit over the network. This is the easiest and preferred method.
!
Use UDP datagrams to configure the unit over the network.
! Use a Hex file to configure the unit over the network.
The Device Server’s configuration is stored in nonvolatile memory (NVRam) and is
retained without power. The configuration can be changed at any time. The Device Server
performs a reset after the configuration has been changed and stored
.
Network Configuration Using a Web
Browser
If your Device Server already has an IP address (see Chapter 6, Getting Started), you can
log into it using a standard Web browser with Java enabled.
1 Type the Device Server’s IP address into the Web browser’s URL (Address/
Location) field.
Figure 7-1: Web Browser Login
Once you have connected to the Device Server, you will see the Lantronix Web
Manager interface.
2 Select Connect to login and gain access to the configuration menu.