Lantronix 100-120 VAC SLB Скачать руководство пользователя страница 231

Страница: 231 / 344

12: Maintenance

SLB™ Branch Office Manager User Guide

231

Note:

If you selected an option that forces a reboot (restore configuration, update

firmware, or reset factory defaults), the SLB unit automatically reboots at the end of the

process.

Zero Touch Provisioning Configuration Restore

The Zero Touch Provisioning feature allows a factory defaulted SLB to acquire a default

configuration from a DHCP server and TFTP server when it is booted. At boot-time, before the

normal startup process, a unit will attempt to acquire network parameters and a configuration file,

first over Eth1, and then over Eth2:



The unit will broadcast on the Eth1 network port for a DHCP server on the local subnet,

requesting DHCP options "TFTP Server" (DHCP option #66) and "Boot Filename" (DHCP

option #67).



If it receives both options from the DHCP server, and the Boot Filename is a valid SLB

configuration filename ending in "-slccfg.tgz", it will attempt to download the Boot Filename

from the TFTP Server.



If it is able to download the Boot Filename from the TFTP Server, it will restore the

configuration onto the SLB, and begin the normal startup process.



If any of these steps fail for the Eth1 network port, it will repeat the process of trying to acquire

a configuration over the Eth2 network port.



After attempting to acquire a configuration over the Eth2 network port, the unit will begin the

normal startup process.

Any results of attempting to acquire and restore a configuration file will be output to the console

port and the system log. Configurations for firmware versions that are newer than the firmware

version running on the unit will not be restored. Spaces are not supported in either the directory or

filename portion of the Boot Filename path.

To manage configuration files:

The

Manage

option on the

Maintenance > Firmware & Configurations

page allows you to view all

configurations saved to the selected location and delete any of the configurations. This feature is

available for the default, CIFS Share, and USB locations.
1. On the

Maintenance > Firmware & Configurations

page, click the

Manage

link. The following

page displays the name and the time and date the file was saved:

Figure 12-2 Manage Configuration Files

Содержание 100-120 VAC SLB

























































































































































































































































































































































Результаты поиска

Содержание 100-120 VAC SLB

Отзывы:

Lantronix 100-120 VAC SLB, Руководство пользователя, Страница: 231 / 344

Результаты поиска

Содержание 100-120 VAC SLB

Отзывы: