Lantech QL-400 Скачать руководство пользователя страница 25

Страница: 25 / 101

OPERATOR INSTRUCTIONS

6.0

Operator Instructions

Note:

Illustrations are for reference only.

Note:

Functions, descriptions and data can be different on your machine. Refer to Section 3 Options.

Note:

It is important to know all components. This includes how to thread the film and operate the

controls.

Note:

Some machines have a remote Emergency Stop. It is important to know the location of all E-stops

before you operate the machine.

WARNING
Obey all Lockout/Tagout procedures before you change, adjust, repair a part.

WARNING
Obey all safety decal instructions and warnings.

WARNING
Do not make a change to this machine without approval from Lantech. It can
cause a safety hazard and cancel the warranty.

WARNING
Do not use this machine with hazardous materials.
Do not operate this machine in a hazardous environment.
Do not operate this machine in an explosive environment.

CAUTION
Do not use a sharp object to remove the film that is wound onto the pre-stretch
roller. It can cause damage to the roller.

CAUTION
Do not let a heavy load stay on the turntable for a long period of time. This can
cause damage to the Urethane Ring.

CAUTION
The Load Height Sensor is a Class 1 Laser
Do not stare into the Laser Beam

Содержание QL-400






































































































Результаты поиска

Содержание QL-400

Отзывы:

Lantech QL-400, Руководство пользователя, Страница: 25 / 101

Результаты поиска

Содержание QL-400

Отзывы: