Lantech IPES-2204F Скачать руководство пользователя страница 14

Страница: 14 / 75

Chapter 3 Hardware Installation

In this paragraph, we will describe how to install the Pro-Ring2s Managed Industrial

Switch and the installation points attended to it.

3.1 Installation Steps

1. Unpack the Industrial switch

2. Check if the DIN-Rail is screwed on the Industrial switch or not. If the DIN-Rail is not

screwed on the Industrial switch, please refer to

DIN-Rail Mounting

section for DIN-

Rail installation. If users want to wall mount the Industrial switch, please refer to

Wall

Mount Plate Mounting

section for wall mount plate installation.

3. To hang the Industrial switch on the DIN-Rail track or wall.

4. Power on the Industrial switch. Please refer to the

Wiring the Power Inputs

section

for knowing the information about how to wire the power. The power LED on the

Industrial switch will light up. Please refer to the

LED Indicators

section for indication

of LED lights.

5. Prepare the twisted-pair, straight through Category 5 cable for Ethernet connection.

6. Insert one side of RJ-45 cable (category 5) into the Industrial switch Ethernet port

(RJ-45 port) and another side of RJ-45 cable (category 5) to the network device

’s

Ethernet port (RJ-45 port), ex: Switch PC or Server. The UTP port (RJ-45) LED on

the Industrial switch will light up when the cable is connected with the network device.

Please refer to the

LED Indicators

section for LED light indication.

[NOTE]

Make sure that the connected network devices support MDI/MDI-X. If it does not

support, use the crossover category-5 cable.

7. When all connections are set and LED lights all show in normal, the installation is

complete.

Содержание IPES-2204F












































































Результаты поиска

Содержание IPES-2204F

Отзывы:

Бренды по названию

Популярные бренды

Lantech IPES-2204F, Руководство пользователя

Результаты поиска

Содержание IPES-2204F

Отзывы:

Бренды по названию

Популярные бренды