26
3. Hardware Installation
– M12 Models
3.1.
Hardware installation
1. Unpack the device
2. Check if want to wall mount the Industrial device, please refer to
Wall Mount Plate
Mounting
section for wall mount plate installation
3. To hang the Industrial device on the wall.
4. Power on the Industrial device. Please refer to the
Wiring the Power Inputs
section for
knowing the information about how to wire the power. The power LED on the Industrial
device will light up. Please refer to the
LED Indicators
section for indication of LED lights.
5. Prepare the straight through X-Code M12 cable for Ethernet connection.
6. Insert one side of X-Code M12 cable into the Industrial device Ethernet port (M12 port)
and another side of cable
to the network device’s Ethernet port, ex: Device PC or Server.
The port(M12) LED on the Industrial device will light up when the cable is connected with
the network device. Please refer to the LED Indicators section for LED light indication.
[NOTE]
Make sure that the connected network devices support MDI/MDI-X. If it does not
support, use the crossover cable.
When all connections are set and LED lights all show in normal, the installation is
complete.
Содержание IMR-3003
