7
LED Indicators
There are few LEDs display the power status and network status
located on the front panel of the Industrial switch converter, each of
them has its own specific meaning as below table.
Table 2.1: Industrial Switch Converter LED Definition
LED
Color
Description
PWR1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
PWR2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
On
Power input 1 or 2 has failed
Off
Power input 1 and 2 are both functional,
or no power input
LNK/ACT
(fiber port)
Green
On
Connected to network
Flashing
Networking is active
Off
Not connected to network
PoE
(IPGC only)
Green
On
Link to PD(PoE device)
Off
Link to none PoE device
DIP-Switch
The DIP-Switch is used to configure operation mode for LLF (
Link Lost
Forwarding
) and power alarm. The default value of DIP-switch is
OFF
.
Table 2.2: Industrial Switch Converter DIP-Switch Definition
S/W
Status
Description
Fault
ON
Enable Power Alarm
OFF
Disable Power Alarm
SFP
Speed
100M
Set SFP speed as 100M
1000M
Set SFP speed as 1000M
