89
QoS Configuration
You can configure Qos policy and priority setting, per port priority setting, COS and TOS
setting.
QoS Policy and Priority Type
Qos Policy:
select the Qos policy rule.
Using the 8,4,2,1 weight fair queue scheme:
The switch will follow 8:4:2:1
rate to process priority queue from High to lowest queue. For example, when
the system processes, 1 frame of the lowest queue, 2 frames of the low queue,
4 frames of the middle queue, and 8 frames of the high queue will be
processed at the same time in accordance with the 8,4,2,1 policy rule.
Use the strict priority scheme:
Always higher queue will be process first,
except higher queue is empty.
Priority Type:
there are 5 priority type selections available. Disable means no
priority type is selected.
Port-base:
the port priority will follow the
Port-base
that you have assigned
– High,
middle, low, or lowest.
COS only:
the port priority will only follow the
COS priority
that you have
assigned.
TOS only:
the port priority will only follow the
TOS priority
that you have
assigned.
COS first:
the port priority will follow the COS priority first, and then other
priority rule.
TOS first:
the port priority will follow the TOS priority first, and the other priority
rule.
Click
Apply
.