Lantech IES-2208C, Руководство пользователя, Страница: 50 / 115

43
function
monitor tx G Set TX destination
port of monitor
function
switch(config)# monitor tx
show monitor P Show port monitor
information
switch# show monitor
monitor
[RX|TX|Both]
I Configure source port
of monitor function
switch(config)# interface
fastEthernet 2
switch(config-if)# monitor RX
show monitor I Show port monitor
information
switch(config)# interface
fastEthernet 2
switch(config-if)# show monitor
no monitor I Disable source port of
monitor function
switch(config)# interface
fastEthernet 2
switch(config-if)# no monitor
802.1x Commands Set
Netstar Commands Level Description Example
8021x enable G Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x
system radius IP
global configuration
command to change
the radius server IP.
switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x
system server port
global configuration
command to change
the radius server port
switch(config)# 8021x system
serverport 1815
8021x system G Use the 802.1x switch(config)# 8021x system