Fiber Solutions - Tools
www.lanpro.com
LPT-CLEAVCL01, 123 Manual Precision Cleaver
LPTCLEAVCL01_M123_ENB01W
LPT-CLEAVCL01
123 Manual Precision Cleaver
Position Adjustment
A
•
Step 1:
Prepare M2 hex wrench, T10 torx screwdiver and a niddle.
Страница 1: ...Tools www lanpro com LPT CLEAVCL01 123 Manual Precision Cleaver LPTCLEAVCL01_M123_ENB01W LPT CLEAVCL01 123 Manual Precision Cleaver Position Adjustment A Step 1 Prepare M2 hex wrench T10 torx screwdiv...
Страница 2: ...w counterclockwise with T10 torx screwdriver Use a needle to rotate the blade to next number position Counterclockwise Hold the blade with thumb while using T10 torx screwdriver to tighten the screw B...
Страница 3: ...nge the height of blade rotate the M3 screws Right screw Rotate screw to clockwise to make it higher and counterclockwise to make it lower Use HG 78 Blade Height Adjustment Gauge to adjust the height...
Страница 4: ...ide surface with a cotton swab soaked in an alcohol Wipe the both magnet surface and outskirts of magnet with a cotton swab soaked in an alcohol Wipe the blade with a cotton swab soaked in an alcohol...
