70
3
BIOS Setup
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the “ACPI Suspend Type” field is set to “S3(STR)”. When this feature
is disabled, the system resume time is shortened but system will
need an AGP driver to initialize the VGA card. Therefore, if the AGP
driver of the card does not support the initialization feature, the
display may work abnormally or not function after resuming from S3.
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the HDD
Power Down field is activated.
Min Saving
Minimum power saving time for the HDD Power
Down = 15 min.
Max Saving
Maximum power saving time for the HDD
Power Down = 1 min.
User Define
Allows you to set the power saving time in the
“HDD Power Down” field.
Disabled
Disables the Power Management function.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS Support
Initializes display power management signaling.
Use this option if your video board supports
it.
Video Off In Suspend
This field is used to activate the video off feature when the system
enters the Suspend mode. The options are Yes and No.
