12
Battery and Charger
Rechargeable battery
Li-ion battery charger
Model : 18350 Li-ion battery
Capacity : 900mAh
Charging time : 3h
lnput : DC 5V/800mAh
Output : DC 4.2V/400mAh x 2
Charging Indicator
(Green light will appear once
the battery is fully charged)
Power input Micro
USB Port
*Note :18350 battery charger can be charged by using one of the following
( a )Power Bank
( b )A PC with USB port
( c )Smartphone Charger
13
Parameter
Item
Parameter
Operating voltage
Operating current
Pitch angle
Roll angle
Yaw angle
Battery operating time
Operating Temperature
Net weight
Product Dimension
Package Dimension
6.5V - 12.6V
Standard 120mA
± 70
± 35
± 157.5
Standard 2h
- 10 ~ 40
414.5g(w/o battery and smartphone)
300.4 * 205.4 * 92.4(mm)
21 * 17 * 18(cm)
14
Ｑuick Start Guide
Step 1:
Connect the grip to the gimbal platform (align the white dots
before turning the knob)
Step 2:
Install smartphone into the clamp and adjust until it is balanced
horizontally and vertically
Step 3:
Unscrew the power button at the end of the grip and install the
two 18350 batteries
Step 4:
Turn the gimbal on by pressing the white power button
Step 5:
Hold the M button for 5 seconds to will stabilize the gimbal
(it will always default to Mode 1 or follow mode); Double-tap
the M button to switch to Mode 2; Triple-tap the M button to
go into Mode 3; Single-tap to return to Mode 1
*
Instructions of above Step 2
For iPhone 4, 4s, 5, 5s, 6, 6s and similar size smartphones
a .Make sure the phone is centered in the clamp. To check the balance, hold
the gimbal with the phone screen facing down.Loosen the back adjustment
knob and adjust so the screen is even with the floor.Tighten the knob.
the knob
11
10
