Lanner NCA-1515, Руководство пользователя, Страница: 17 / 19

Chapter 4: BIOS Setup
17
The status explanations of LED indicators on Front Panel are as follows:
System Power
Solid Green The system is powered on
Off The system is powered off
System Status
This LED indicator is programmable. You could program it to display the operating status of the
behaviors described below:
Solid Green Defined by GPIO
Solid Red Defined by GPIO
Off Defined by GPIO
HDD Activity Status
Blinking Amber Data access activities
Off No data access activities
RJ45 LAN Status
Upper LED
(Speed)
Solid Green Operating as a 100 Mbps connection
Solid Amber Operating as a Gigabit connection (1000 Mbps)
Off No link has been established
Lower LED
(Link Status)
Solid Amber Link has been established and there is no activity on this port
Blinking Amber Link has been established and there is activity on this port
Off No link has been established
SFP Port
Solid Amber Link has been established and there is no activity on this port
Blinking Amber Link has been established and there is activity on this port
Off No link has been established
System Power
System Status
HDD Activity