Lanner NCA-1010, Руководство пользователя, Страница: 21 / 46

Hardware Setup
21
Warning: (1) To reduce the risk of personal injury, electric shock, or damage to the equipment,
please remove all power sources. (2) Please wear ESD protected gloves before conducting the
following steps. (3) Do NOT pile items on top of the system to prevent damages due to this improper use.
Lanner is not liable for damages caused by improper use of the product.
The motherboard supports DDR3L non-ECC DIMM memory. Please follow the steps to install the DIMM
module.
Locate the DIMM socket at the
bottom side of the motherboard.
Align the notches of both the socket
and the module.
Insert the module into the socket,
press the module and lock it with clips
on both sides.