LWR-X8460 User Manual
13
Before deploying and configuring the LWR-X8460, the device needs to be properly powered up and connected
to the network.
Step 1:
Power on the LWR-X8460 Access Point. Connect the power adapter (included) to LWR-
X8460’s
48VDC
port and plug the power adapter into a power supply. If powering by PoE, connect the 802.3bt compliant PoE
power adapter (sold separately) to LWR-
X8460’s WAN port and plug the power adapter into a power supply.
Step 2:
Connect the LWR-X8460 LAN Port (10GbE) to a computer/laptop via Ethernet cable.
Step 3:
Please wait a moment for LWR-X8460 to start up. The wireless access point is ready when the Power
LED turns
Green
.
Power by DC Power Adapter
Power by PoE-PD
PoE Adapter
Power Adapter