Lanner ICS-P570, Руководство пользователя

Страница: 23 / 63

ICS-P570 User Manual
23
The motherboard supports 2x DDR 2400MHz SODIMM for additional system memory. Please follow the
procedures for installation.
1. Power off the system, turn the system
around, and open the bottom chassis
cover. Remove the metal partition by
loosening the two (2) screws.
2. Locate the DIMM socket on the
motherboard.
3. Align the notches of the DIMM module
with the socket key in the pin slot.
4. Insert the module into the slot at a
diagonal angle and press down until it is
firmly seated by the clips on both sides.
5. Repeat the steps to insert a second
DIMM module.
6. Next, thermal pad placement. Remove
the protective film on the two (2) Thermal
Pad (included in accessory pack), and
gently place on the DIMM modules.
7. Then place the metal bracket back on top
and secure with two (2) screws.
Socket Key
Notch