Lanier LD1110 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 234

Lanier LD1110 Скачать руководство пользователя страница 69

Copier Functions

49

2

Copier Functions

This section describes the copy functions.

Adjusting Copy Image Density

There are three types of adjustment available.

❖

Auto Image Density

The machine automatically adjusts the image density by scanning the densi-
ties of originals. Dark texture originals (such as newspaper or recycled paper)
will be copied so that background will not be reproduced.

❖

Manual image density

You can adjust the general density of the original in nine increments.

❖

Combined auto and manual image density

Adjusts the density of an image only for dark texture originals.

Auto image density

The machine automatically adjusts the image density by scanning the densities
of originals. Dark texture originals (such as newspaper or recycled paper) will
be copied so that background will not be reproduced.

A

Make sure that

[

Auto Density

]

is selected.

«
...
67
68
69
70
71
...
»

Содержание LD1110











































































































































































































































Отзывы:

Нет отзывов