Lanier 5415, Руководство оператора

Страница: 93 / 104

G-1
Copier Terms
% (percentage) The ratio of the original image size to the copied image size. If the copy
image is larger than the original, the % number is larger. A copied image
that is twice the size of the original is said to be 200%. If the copy image
is smaller than the original, the % number is lower. A copied image that is
half the size of the original is said to be 50%.
10-key pad The portion of the Control Panel with numerical keys. These keys are
used primarily to input the desired number of copies and are also used to
input numerical data into the copier during programming.
Book Originals Any bound original that cannot be fed through the Feeder. Because the
pages cannot be separated, they must be copied manually from the
Exposure Glass. The Book Original features can be used to make the
book copying process more efficient.
Bypass Feed Tray A Tray used to feed single sheets of special or transparent stock into the
copier to be copied. Because sheets from this tray feed straight through
the copier paper path, the Tray is especially useful for feeding heavy
stock. See also: Stack Feed Bypass Tray.
Casual Operator An operator that uses the copier to make copies but does not have Key
Operator responsibilities such as adding Toner or calling for service.
Charge Corona A device located near the Drum that activates the light sensitivity of the
Drum and prepares it to be exposed and imaged.
Cleaning Unit An assembly that cleans any residual image toner from the Drum in
preparation for the next image.
Clear/Stop Key The Key used to stop a copy job while it is still running. It may also be
used to clear program functions from a previous job and return to the
default settings.
Control Panel The surface at the front of the copier containing Keys used to control the
operation of the copier. It usually also contains the display that shows the
status of the copier or the job in progress.
Copies The imaged paper output from a copier. It might be a direct reproduction
of the input document or it can contain any number of changes as
programmed into the copier such as Enlargement/Reduction, Trim/Mask,
etc.
Copies in Progress This display or part of a display shows how many copies of the total have
been made.
Copies Selected This display is the same as Copy Quantity, in that it shows the number of
copies requested.