Lanier 5415, Руководство оператора

Страница: 45 / 104

Function Mode
Copying Methods 4 - 11
Using Function Modes
The Function Mode Indicator
•
The Function Mode indicator will become lit when settings other than the Initial Mode
are selected.
•
The Zoom indicator will become lit and the zoom ratio will automatically be decreased
when F2 (2in1 Non-Sort) or F4 (2in1 Sort) are selected.
2in1 Copying
When using the 2in1 function, it is important to set the original documents correctly to prevent
them from being output in reverse order.
Setting the Original Documents for 2 in 1 copying
F2: 2in1 Non-Sort Mode
•
The Automatic Document Feeder supports this function.
•
This function can also be performed by setting the document directly onto the Original
Glass. Place each individual sheet of the original document onto the glass (in the order
of first to last) and press the Start Key.
Be sure to add a blank sheet of paper to an original document that consists of an odd
number of sheets.
F4: 2in1 Sort Mode
•
The Automatic Document Feeder supports this function.
•
This function cannot be used when copying documents that are placed directly onto the
Original Glass.
When using ADF When placing original on ex[posure glass