3
1
General information
Note!
Any person involved in the installation, operation and repair of the product
must first read, understand and follow these instructions. We accept no liability
for damage and operating malfunctions caused by failure to comply with these
instructions.
In the interest of further development, we reserve the right to change individual assemblies
and accessories as considered necessary for further safety and performance
improvements, while preserving the main features.
The copyright to these instructions remains with Langmatz GmbH.
2
Safety information
The product corresponds to the latest state-of-the-art technology at the time of printing and
is delivered in an operationally safe condition.
Unauthorised modifications, particularly to safety-related parts, are prohibited.
Langmatz GmbH warns against misuse of the product.
The operator is responsible for installing, operating and maintaining the fixtures.
The operating company is responsible for the following:
•
Preventing danger to life and limb of users and third parties.
•
Ensuring safe operation.
•
Precluding downtime and environmental impact due to incorrect handling.
•
Ensuring that protective clothing is worn when working with or on the product.
Do not use the product if it is damaged. Please contact the
hotline (see section 13 Contact).
Note!
Applicable occupational safety and environmental protection regulations must
be observed during installation, operation, maintenance or repair.
Warning!
Note the following when using L100 sealing foam:
- Wear protective gloves.
- Keep the sealing foam out of reach of children.
- Sealing foam is irritating to eyes, skin and respiratory organs and may
cause damage to health. In case of contact, rinse eyes thoroughly and
wash skin with soap and water.
- The optimum working temperature is +5°C to +40°C (i10°C to
+25°C).
- Storage temperature: +5°C to +40°C (o20°C).
