10
6.4
Removing the antenna manhole cover
•
Screw in the M10 hexagon socket
grub screw
(1)
using an SW5 Allen
key.
•
The antenna manhole cover
(2)
will lift
and can be removed with the aid of a
suitable tool.
Fig. 12
6.5
Installing the antenna mounting brackets
•
Position the antenna mounting
brackets
(2)
(accessories kit) correctly
in the manhole (Do not screw them
on).
•
If necessary, position spacers
(1)
(accessories kit) on the mounting
brackets so that the antenna is as
close as possible to the cover.
Clearance between bottom of cover
and top of antenna
= approx. 5 mm.
Fig. 13
6.6
Positioning the antenna manhole cover
Fig. 14
•
Place the antenna manhole cover
(1)
on the steel frame.
•
Apply anti-seize paste to the 4x M10
socket head cap screws
(2)
and tighten
them.
Torque = 32 Nm.
(Anti-seize paste included in
accessories kit).
Note:
The exterior of the steel frame has a
silver aluminium strip on each of the 4x
nut mounts and end caps
(3)
.
This prevents concrete from penetrating
the antenna manhole.
1
2
1
2
1
2
3
