Langmatz basic plus EK523, Руководство по эксплуатации

Страница: 15 / 28

15
Installation
9.1 Drilling mounting holes in the pole
Fig. 10
We recommend using a spirit level to ensure
correct levelling.
•
Remove the protective film from the
drilling template (1) .
•
Attach the drilling template to the pole so
that the bottom edge of the template is
850 mm above the footpath.
•
Punch-mark 3 drill holes (2) .
•
Drill 2 holes with a diameter of 5 mm (3)
(for mounting).
•
Cut 2 M6 threads (3) .
•
Drill 1 hole with a diameter of 14 mm (4)
(for the cable duct).
Langmatz recommends using a metal
drilling jig.
Langmatz item no. 700663080.
See also chapter 12 (Accessories).
9.2 Opening the pedestrian signal requesting device
•
On the pedestrian signal requesting
device,
open the 2 locking screws (2) with a
size 4 Allen key and remove the top
part
(1) of the device.
Fig. 11
1
850
m
m
2
3
4
1
2