Langmatz basic plus EK523, Руководство по эксплуатации

Страница: 13 / 28

13
Switch positions and functions
Fig. 6
Fig. 7
Flashing ON / OFF.
In flashing mode, the feedback signal is switched
to flashing when cores 4 and 5 are actuated or in
APB mode.
APB ON / OFF
APB = Visual acknowledgement by push-button
or sensor. The device independently
acknowledges the signal request through visual
feedback.
The visual feedback is reset when the pedestrian
crossing signal is applied to the feedback input
(cores 4 and 5).
A short pulse length of 50
– 500 ms is all that is
needed.
AS ON/OFF
AS = Acknowledgement sound. The
acknowledgement sound is emitted from the
integrated buzzer and audibly confirms the signal
request.
APB switching output / Sensor NC / NO.
Switching output vibrator NC / NO.
Note: All switch changes are only applied once the operating voltage has
been switched off for a minimum of five seconds and after
reactivation.
S1
1
2
3
4
5