Langer FLS 106 IC, Руководство пользователя

Страница: 32 / 79

- 32 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
mail@langer-emv.de
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Clamping Pieces 10.4
The clamping pieces are used as fasteners to individually position and mount the UH DUT
universal holder or a DUT on the FLS 106 scanner's T-slot table.
The clamping pieces can be mounted in a T-slot with the hexagon socket screw M6 (hexagon
socket 5 mm) and a T-nut. The clamping pieces' angle and height can be adjusted with the two
grub screws (hexagon socket 6 mm).
Figure 29: Clamping piece with grub screws Hexagon socket screw for clamping piece
UH DUT with Claw 01 and Claw 02 10.5
The UH DUT universal holder is used to fix the DUT. The universal holder is 297 mm long, 210 mm
wide and 8 mm high.
The 20 mm x 20 mm grid of M3 threaded holes allows the DUT's individual positioning.
The DUT can be fixed with the respective claw 01 or claw 02. There are two types of claws that
can be chosen depending on the DUT's height.
Figure 30: UH DUT with claw 01 and claw 02 on the T-slot plate