Lang Cruise CLG-48C-S, Установка, эксплуатация, обслуживание и устранение неисправностей

Страница: 8 / 19

8
INITIAL START UP
5.1 Initial Start Up
Before starting the griddle for the first time, clean the griddle body and cooking surface
with a mild soap and water solution then rinse with clear water and dry.
Set the main power switch, located at the far left of the control panel, to the "ON" (up)
position.
Set the temperature dials to 200 degrees.
Heat the griddle at 200 degrees for 2 hours to evaporate any moisture that may be in the
elements.
After 2 hours at 200 degrees, proceed with "SEASON THE COOKING SURFACE".
5.2 Season the Grill
The cooking surface must be "seasoned" in order to reduce product sticking.
To season, heat the griddle to 250 degrees.
Once at 250 degrees, coat the cooking surface with a non-salted vegetable oil.
Allow the griddle to stand at 250 degrees until the cooking surface looks dry then coat it
again.
Heat the griddle to 350 degrees and repeat the procedure.
The griddle may emit a small amount of smoke as the cooking surface passes the
350
°
point. Do not be alarmed as oils associated with the manufacturing process
may cause smoke and will stop when the griddle reaches 350 degrees.