WORK
POSITIONING
DEVICE
The work positioning device PROT-40 is the component of the personal protective equipment for work positioning and prevention of
falls from a height. It complies with EN 358.
The function of the device is to prevent an occurrence of a fall from the height. PROT-40 is very useful performing works at the height on
the pillars, trees, lattice constructions. It is needful when the job you are performing require a stable work position, very often without
holding on with hands.
The device PROT-40 complies with EN 358.
EN 358:1999
Instruction Manual
PROT-40
Ref.:
X
PPDPROT40xxx
PROT-40
EN 358:1999
name of the device
type of the device
reference number of the device*
number of the manufacturing series
month/year of the device manufacture
marking of the manufacturer or distributor
CONTENT OF THE DEVICE IDENTITY LABEL
*) xx - code of length
for example: xx=03 - length 3 m
xx=20 - length 20 m
WORK POSITIONING DEVICE
X
PPDPROT40XXX
LENGTH: xx m
Serial number:
00003
Date of manufacture:
02/2001
ATTENTION!
The work positioning device PROT-40 can be equipped only with certified (according to EN 362) snap hooks
.
caution: read the manual
EC type examination carried out by APAVE SUDEUROPE SAS, BP 193, 13322 Marseille, France - 0082
CE marking and number of a notified body
controlling manufacturing of the equipment (art. 11)
number / year of the European standard
the equipment conform
READ CAREFULLY BEFORE USE
THE EQUIPMENT
BASIC EQUIPMENT
steel wire rope covered by polyester jacket of diameter
ø
1 mm;
aluminium adjuster of the rope length;
rope protecting tube.
!
!
!
1
adjuster of the
rope length
steel wire rope
covered with polyester
ø
1 mm
1
free ending
of the rope
rope protecting tube
!
!
the anchor device or anchor point for the fall arrest system should always be positioned, and the work carried out in such a way, as to minimise both the potential for falls
and potential fall distance. The anchor device/point should be placed above the position of the user . The shape and construction of the anchor device/point shall not
allowed to self-acting disconnection of the equipment. Minimal static strength of the anchor device/point is 15 kN.
I
t is recommended to use certified and marked structural
anchor point complied with EN795.
!
it is obligatory to verify the free space required beneath the user at the workplace before each occasion of use the fall arrest system, so that, in the case of a fall, there will
be no collision with the ground or other obstacle in the fall path. The required value of the free space should be taken from instruction manual of used equipment.
!
there are many hazards that may affect the performance of the equipment and corresponding safety precautions that have to be observed during equipment utilization,
especially:
- trailing or looping of lanyards or lifelines over sharp edges,
- any defects like cutting, abrasion, corrosion,
- climatic exposure,
- pendulum falls,
- extremes of temperature,
- chemical reagents,
- electrical conductivity.
!
personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or foil bag or cases made of steel or plastic) to protect it against
damage or moisture.
!
the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the equipment. For textile products use mild detergents for delicate
fabrics, wash by hand or in a machine and rinse in water. Plastic parts can be cleaned only with water. When the equipment becomes wet, either from being in use or when
due cleaning, it shall be allowed to dry naturally, and shall be kept away from direct heat. In metallic products some mechanic parts (spring, pin, hinge, etc.) can be regularly
slightly lubricated to ensure better operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of the equipment.
!
personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, ultraviolet degradation, damp environment, sharp edges,
extreme temperatures and corrosive or aggressive substances.
,
a full body harness complied with EN 361
is the only acceptable body holding device that can be used in a fall arrest system.
IDENTITY CARD
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
3
4
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PUTTING INTO OPERATION
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON.
THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
MODEL AND TYPE
OF EQUIPMENT
REF. NUMBER
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
identity label
LANEX a.s., Hluèínská 1/96, 747 23 Bolatice, Èeská republika, www.lanex.cz,
TEL.: +420 553 751 111, FAX: +420 553 654 125, E-MAIL: [email protected]
Periodic inspections
The device must be inspected at least once every 12 months from the date of first use.
Periodic inspections must only be carried out by a competent person who has the knowledge and training required for personal protective
equipment periodic inspections.
Depending upon the type and environment of work, inspections may be needed to be carried out more frequently than once every 12 months.
Maximum lifetime of the device
The maximum lifetime of the device is 8 years from the date of manufacture. The maximum lifetime depends on the intensity of usage and the
environment of usage. Using the device in rough environment, marine environment, contact with sharp edges, exposure to extreme temperatures or
agressive substances, etc. can lead to the wthdrawal from use even after one use.
The device must be withdrawn from use immediately and destroyed when it has been used to arrest a fall.
