4
6
8
9
10
13
17
14
15
16
1. Shoulder strap.
2. Shoulder strap adjusting buckle.
3. Frontal attachment D-ring - for attaching fall
arrest system.
4. Connecting snap hook.
5. Frontal waist attachment buckle - can be
utilized as a sit harness according EN 813 (it's
not allowed to use this buckle to attach fall
arrest system).
6. Lateral belt attachment D-rings. Can be
utilized only to attach work positioning systems
according
EN 358.
7. Work positioning belt strap.
8. Work positioning belt strap adjusting buckles.
9. Thigh straps.
11. Dorsal attachment D-ring - for attaching fall arrest
system.
12. Crossing plate.
13. Dorsal strap adjusting buckle.
14. Belt pad.
15. Tool PLastic D-rings.
16. Tool Loops.
17. Identity label
Size:
M-XL
XXL
PROVIEVO
SAFETY HARNESS
Ref.
XPSHPROFIEVO
Date of manufacture:
12.2011
Serial number:
0000001
b
a
c
d
e
f
g
h
i
j
a-Device type, b-Model symbol, c-Reference
number, d-number/year European standards
e-CE mark and number of the notified body
controlling manufacturing of the equipment,
f- Month and year of manufacture, g-Serial
number of the harness, h-Harness size,
i-Caution: read the manual, j- identification of
the harness manufacturer or distributor.
k - max. weight for the sit harness use.
HARNESS MARKING
SIZES
The harness is manufactured in two sizes:
- medium and extra large size - M-XL
- extra large -XXL
7
,
!
a full body harness
(conforming to EN 361) is the only acceptable body holding device that can be used in a fall arrest system.
!
in full body harness use only attaching points marked with big letter "A" to attach a fall arrest system.
!
the anchor device or anchor point for the fall arrest system should always be positioned, and the work carried out in such a way, as to minimise both the
potential for falls and potential fall distance. The anchor device/point should be placed above the position of the user . The shape and construction of
the anchor device/point shall not allowed to self-acting disconnection of the equipment. Minimal static strength of the anchor device/point is 10 kN.
I
t is
recommended to use certified and marked structural anchor point complied with EN795
!
it is obligatory to verify the free space required beneath the user at the workplace before each occasion of use the fall arrest system, so that, in the case
of a fall, there will be no collision with the ground or other obstacle in the fall path. The required value of the free space should be taken from instruction
manual of used equipment.
!
there are many hazards that may affect the performance of the equipment and corresponding safety precautions that have to be observed during
equipment utilization, especially:
- trailing or looping of lanyards or lifelines over sharp edges,
- any defects like cutting, abrasion, corrosion,
- climatic
exposure,
- pendulum falls,
- extremes of temperature,
- chemical reagents,
- electrical conductivity.
!
personal protective equipment must be transported in the package (e.g.: bag made of moisture-proof textile or foil bag or cases made of steel or plastic)
to protect it against damage or moisture.
!
the equipment can be cleaned without causing adverse effect on the materials in the manufacture of the equipment. For textile products use mild
detergents for delicate fabrics, wash by hand or in a machine and rinse in water. Plastic parts can be cleaned only with water. When the equipment
becomes wet, either from being in use or when due cleaning, it shall be allowed to dry naturally, and shall be kept away from direct heat. In metallic
products some mechanic parts (spring, pin, hinge, etc.) can be regularly slightly lubricated to ensure better operation.
Other maintenance and cleaning procedures should be adhered to detailed instructions stated in the manual of the equipment.
!
personal protective equipment should be stored loosely packed, in a well-ventilated place, protected from direct light, ultraviolet degradation, damp
environment, sharp edges, extreme temperatures and corrosive or aggressive substances.
EN 361:2002
EN 358:1999
EN 813:2008
Instruction Manual
READ CAREFULLY BEFORE USE THE EQUIPMENT
SAFETY HARNESS
EN 358:1999
EN 361:2002
5
Safety harness is the basic
element of fall ar
rest
equipment.
The harness P-complies with EN
361
(as a full body harness),
EN 358 (as a work
positioning belt) and EN
813 (as a sit harness) - the
maximum load of the sit
harness is 100 kg.
The harness is made of
polyamide webbings.
Models:
basic version.
- elasticated
shoulder's strap.
- quick release
buckles in the legs.
EN 813:2008
max. load 100 kg
IDENTITY CARD
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PUTTING
INTO OPERATION
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED. THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST
USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS,
REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED INTO THE IDENTITY CARD BY A COMPETENT PERSON. THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE
PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD. ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
PERIODIC EXAMINATION AND REPAIR HISTORY
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
1
2
3
4
Notified body, at which the European certification
was performed and which supervises
the production of the equipment:
APAVE SUDEUROPE SAS - BP 193 - 13322 MARSEILLE CEDEX 16 - FRANCE
A
2
3
1
12
11
k
PROFIEVO
Ref.
XPSHPROFIEVO
LANEX a.s., Hlučínská 1/96, 747 23 Bolatice,
Česká republika, www.lanex.cz,
TEL.: +420 553 751 111, FAX: +420 553 654 125,
E-MAIL: [email protected]
