Included components
Tools Required
•
Safety glasses
•
Hex key 5/32” for nut covers, 7/32” for luminaire to pole, 3/16” for top cap/finial attachment
•
Wrenches, 1-1/8”
•
Screwdrivers, Phillips and straight blade
•
Wiring tools and connectors
•
Proper personnel, crane or lift for hoisting unit onto anchors
•
Level
•
Dimming control, if required.
•
Twist lock photo eye, if required
Landscape Forms is not responsible for site preparation and
footings. Refer to the installation guide for the Signal Area light
anchor kit for installing the anchor bolts.
WARNING!
Pole mounted luminaires must be attached either
before or
immediately
after pole installation. Failure to do so may
cause vibration damage to the pole and will void the pole
warranty.
CAUTION!
This unit is heavy. To avoid injury or damage to the
finish, we recommend using a crane or lift for hoisting the unit
onto the anchors.
ASSEMBLE WITH CARE!
To protect this finish during assembly, place
unwrapped powdercoated parts on packaging foam or other non-marring
surface. Do not place or slide powdercoated parts on concrete or other
hard or textured surface – this will damage the finish causing rust to occur.
Use touch-up paint on any gouges in the finish caused by assembly tools.
Installation Guide
Signal
Area Light
www.landscapeforms.com Ph: 800.521.2546
Date: December 12, 2019
Page 1 of 6
4X - Nut cover with
1/4-20 x 5/8” button
head cap screw
Pole with base plate
12ft
16ft
20ft
Twist lock receptacle,
optional
Shorting cap for
Twist lock,
optional
2X - 3/8
washer
2X - 3/8 button
Head cap screw
2X - 5/16 button
Head cap screw
2X - 5/16
washer
2X - 5/16
sealing
washer
2X - 5/16
washer
Signal 24 luminaire
Signal 32 luminaire
Top cap
Finial OR
25ft
