Surface Mount
Included hardware
Fig. 1 – Minimum footing recommendation
Fig. 3 – Recommended setback
from sidewalk
Fig. 4 – Bottom view
Fig. 2 – Minimum concrete slab size
Tools Required
•
Safety glasses
•
Screwdrivers
•
Wiring tools and connectors
•
Anchoring hardware – (4) Ø3/8 (maximum) x 3-1/2” length stainless steel anchors.
Landscape Forms recommends Power bolts or drop-in wedge anchors
•
Hammer drill
•
3/16” hex key
ASSEMBLE WITH CARE!
Pangard II
Polyester Powdercoat is a strong, long-lasting finish. To protect
this finish during assembly, place unwrapped powdercoated parts on packaging foam or other non-
marring surface. Do not place or slide powdercoated parts on concrete or other hard or textured
surface – this will damage the finish causing rust to occur. Use touch-up paint on any gouges in the
finish caused by assembly tools.
Fig. 5 – Base plate section view
LIGHTING LAYOUT RECOMMENDATIONS:
Refer to the Product Data Sheet
Installation Guide
Hawthorne
Path Light
www.landscapeforms.com Ph: 800.521.2546
Date: April 05, 2023
Page 1 of 2
1x – Cabinet
dome cover
4x – Cabinet
cover
1x – LED
driver
1x – Cabinet
dome
retainer bar
4x – Cabinet
cover screw
1x – Lightpole
assembly
1x – anchor
template
WARNING!:
LED cartridge and driver are not rated for connection or disconnection
while energized. Doing so may damage LEDs and will void the warranty. Disconnect
incoming power before making or breaking any electrical connections.
