Landoll ICON 6510, Руководство по запчастям и обслуживанию

Страница: 55 / 62

6-1
Chapter 6
Troubleshooting Guide
The Troubleshooting Guide, shown below, is included to
help you quickly locate problems that can happen using
your 6510 Disc. Follow all safety precautions stated in the
previous sections when making any adjustments to your
machine.
PROBLEM PROBABLE CAUSE SOLUTION
TRACTOR TRYING TO SIDE DRAFT SIDE DRAFT LINKAGE OR CYLINDER
ON 6510 NOT PROPERLY SET ADJUST SIDE DRAFT LINKAGE OR
CYLINDER ON 6510 TO PROPER
LENGTH
FIXED OR PINNED DRAWBAR ON
TRACTOR USE SWINGING DRAWBAR
SWINGING DRAWBAR ON TRACTOR
AGAINST STOP ON LEFT HAND SIDE LENGTHEN SIDE DRAFT LINKAGE OR
CYLINDER ON 6510
UNIT TRAILING OFF TO THE LEFT FRONT GANG IS RUNNING TOO DEEP ADJUST LEVELING CYLINDER TO
RAISE FRONT GANG
SIDE DRAFT LINKAGE OR CYLINDER
ON 6510 NOT PROPERLY SET SHORTEN SIDE DRAFT LINKAGE OR
CYLINDER ON 6510
UNIT TRAILING OFF TO THE RIGHT REAR GANG IS RUNNING TOO DEEP ADJUST LEVELING CYLINDER TO
LOWER REAR GANG
SIDE DRAFT LINKAGE OR CYLINDER
ON 6510 NOT PROPERLY SET LENGTHEN SIDE DRAFT LINKAGE OR
CYLINDER ON 6510
UNIT NOT DISCING LEVEL UNIT IS NOT LEVEL FROM FRONT TO
REAR ADJUST LEVELING CYLINDER TO
ACHIEVE LEVEL UNIT
DISC GANG PLUGGING SCRAPERS SET TOO FAR FROM DISC
BLADE ADJUST SCRAPERS TO MEET DISC
BLADE CLOSER AND EVENLY
OPERATING DEPTH TOO DEEP RAISE UNIT
CONDITIONS TOO WET WAIT UNTIL CONDITIONS ARE MORE
FAVORABLE
DISC GANG WILL NOT TURN OR
PUSHES SOIL SCRAPERS SET TOO TIGHT READJUST SCRAPERS
DEPTH SET TOO DEEP FOR LOOSE OR
WET CONDITIONS RAISE UNIT OR WAIT UNTIL
CONDITIONS ARE MORE FAVORABLE
GANG BEARING FAILURE REPLACE BEARING
NOT FILLING FURROW ON LEFT SIDE
OF UNIT SPEED TOO SLOW FOR SOIL
CONDITIONS INCREASE SPEED
REAR OF DISC TRACKING TOO FAR TO
THE RIGHT LENGTHEN SIDE DRAFT LINKAGE OR
CYLINDER ON 6510
TRACTOR BEING DRIVEN TOO FAR TO
THE RIGHT DRIVE TRACTOR SO THAT LEFT
FRONT DISC IS IN THE EDGE OF THE
FURROW